Saturday, January 13, 2018

Shop Wiring For Lathe

The plan is to setup the lathe motor for 220V and piggyback it to the breaker connect to the round outlet on the bottom left of the box, that I have yet to use.  The wires will use the conduit on the upper right which is empty.















The image below did not come out well.  IPhone X camera was having fits.  The conduit to the right of the first connector was already in place.  The next two bits and the box were added.  It was easier to use 2 sections for the double bend on the left side of the post.  I'm still debating on what plugs and sockets if any will be used.  Not much of a down side to hardwiring it.  Maybe even drop conduit out the bottom of the box and have it connect to the drum switch.  Need to see if that makes sense.





No comments:

Post a Comment