The outside dimension is 1.55" and the inside 1.25. 1.54" may fit a bit better. My gasket material is a little on the thin side so I used 2 or 3 gaskets in the bottoms.
Wednesday, February 21, 2018
Drip Oiler Gaskets
Although I previously cleaned and reassembled the drip oilers the gaskets leaked. New ones were cut using cricut and make the cut.
The outside dimension is 1.55" and the inside 1.25. 1.54" may fit a bit better. My gasket material is a little on the thin side so I used 2 or 3 gaskets in the bottoms.
The outside dimension is 1.55" and the inside 1.25. 1.54" may fit a bit better. My gasket material is a little on the thin side so I used 2 or 3 gaskets in the bottoms.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment