Sidney Photos, legs and the headstock cover

Started snowing about 8AM but did not amount to much.




Skim coated the visible part of the first leg.


















Removed the excess with a 40 grit 5" random orbital sander.  This is quite an improvement over what it was.

Primed it again and set it aside for paint day.































First image is after sanding with 40 grit on the RO sander.  The following image is after body putty and another coat of primer.  Adding glaze to fill some defects and refining the shape in a few places.




Did a bit of bondo on the bed and lots of glazing to fill small holes on the backside.

Shop was getting cold so I shut down for today.